Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 1361
Brocade Network Advisor SAN + IP User Manual
1289
53-1003155-01
Adding thresholds
29
FIGURE 569
Add Protocol Error Threshold dialog box
4. Enter a name for the threshold in the Name field.
5. Select the Fabric OS check box.
a. Select one of the following options:
•
Default — Uses device defaults. Go to
•
Custom — Uses your selections. Continue with
.
b. Enter the number of protocol errors allowed for the threshold from the Threshold errors
field.
c. Select the time period for the threshold from the errors per list. The following choices are
available:
•
None — the port is blocked as soon as the specified number of protocol errors allowed
is met.
•
Second — the port is blocked as soon as the specified number of protocol errors
allowed is reached within a second.
•
Minute — the port is blocked as soon as the specified number of protocol errors
allowed is reached within a minute.
•
Hour — the port is blocked as soon as the specified number of protocol errors allowed
is reached within a hour.
•
Day — the port is blocked as soon as the specified number of protocol errors allowed is
reached within a day.
6. Click OK to add the protocol errors threshold to the table and close the Add Protocol Error
Threshold dialog box.
To assign this threshold to fabrics, switches, or switch ports, refer to
7. Click OK on the Port Fencing dialog box.