Viewing a mrp ring – Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 611
Brocade Network Advisor SAN + IP User Manual
539
53-1003155-01
Viewing a MRP ring
10
When you select a device on the Topology Map, the application highlights the device in the
Product List.
Viewing a MRP ring
To view a MRP ring, click a ring in the Product List.
The selected ring displays in the Topology Map.
FIGURE 231
MRP Topology dialog box
MRP Topology maps are comprised of nodes (rings) and connections (devices).
displays
the basic elements included in a MRP topology map.
TABLE 55
MRP Topology map elements
Element
Description
Device icon
Each device on the map displays its device name and IP address.
[MASTER]
Denotes the master device.
solid line
The nodes on the ring are connected and in normal operating state.
- - - - - - - - - - - - - - - -
broken line
The two end points of an MRP link are disabled. To show a broken line on the
topology, refer to
“Configuring the application to show a dashed line”
link with arrow head
The port is in a pre-forwarding or forwarding state and shows the direction of
the packet flow.