Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 2464
2392
Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Database tables and fields
I
LEVEL3_ENABLED
Enable / disable the third threshold check. This value
is applicable only for Top N, Top Flow widgets. Default
is 0.
smallint
LEVEL3_VALUE
Limit value for the third percentage band. Default is
0.
double
precision
LEVEL3_COLOR
Limit value for the third percentage band.
int
LEVEL4_ENABLED
Enable / disable the fourth threshold check. This
value is applicable only for Top N, Top Flow widgets.
Default is 0.
smallint
LEVEL4_VALUE
Limit value for the fourth percentage band. In case of
Top N, Top Flow widgets only three percentage bands
are available. This value is not applicable. Default is
0.
double
precision
LEVEL4_COLOR
RGB color for the fourth percentage band.In case of
Top N, Top Flow widgets we will use this column to
store the color value for other percentage band.
int
LEVEL5_ENABLED
Enable / disable the fifth threshold check. This value
is applicable only for Top N, Top Flow widgets. Default
is 0.
smallint
LEVEL5_VALUE
Limit value for the fifth percentage band. In case of
Top N, Top Flow widgets only three percentage band
s are available. This value is not applicable. Default is
0.
double
precision
LEVEL5_COLOR
RGB color for the fifth percentage band. In case of
Top N, Top Flow widgets only three percentage bands
are available. This value is not applicable.
int
CATEGORY
Category of the dashboard monitor. 0 - System
defined, 1 - User defined, 2 - Promoted from
Historical Graph, 3 - Promoted from Real time Graph.
Default is 0..
smallint
GRAPH_ENABLED
Enable or disable the time series graph for Top n or
Bottom n widgets. 0 = disabled, 1 = enabled.
smallint
FILTER_CRITERIA
Stores the filter criteria to be applied on the selected
measure for products or ports.
varchar
256
FILTER_VALUE
Stores the measure value to be used in the filter
criteria.
double
precision
USE_DASHBOARD_SCOPE
Use Dashboard scope or widget scope. 0 - Widget
scope, 1 - Dashboard scope.
smallint
PORT_TYPE
Types of ports to use for port measure widgets: 0 -
All Ports, 1 - ISL Ports, 2 - Host Ports, 3 - Storage
Ports.
smallint
TABLE 285
PM_DATA_COLLECTOR
Field
Definition
Format
Size
ID Primary
key
column.
int
NAME
The name of the collector definition.
varchar
128
TABLE 284
PM_DASHBOARD_WIDGET (Continued)
Field
Definition
Format
Size