Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1416)

1344 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
sFlow
31
sFlow
The IP Element Manager supports sFlow to capture traffic data and configure sFlow collector.
Configuring sFlow in Element Manager
1. Click the Configure icon in the Element Manager toolbar.
2. Select sFlow (as shown in Figure 600 ).
or
To access the sFlow from Element Manager, right-click a module (or modules), trunk (or
trunks), or port (or ports) and select sFlow.
FIGURE 600 sFlow dialog box
3. To configure sFlow, refer to “Configuring sFlow” on page 1688.
VRRP-E: VRRP/ VRRP-E management
The IP Element Manager supports VRRP for MLX devices only. The VRRP management is supported
in MLX Element Manager using the CLI Configuration Manager. When you launch the VRRP/VRRP-E
dialog box, the existing VRRP configuration for the selected MLX device is displayed.
Configuring a VRRP/VRRP-E router
1. Click the Configure icon in the Element Manager toolbar.
2. Select VRRP/VRRP-E (as shown in Figure 601 ).