D in, Table 16 – Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 132
62
Brocade Network Advisor SAN + IP User Manual
53-1003155-01
IP discovery overview
3
provides a list of MIB support required for third-party devices.
TABLE 16
Required MIB support for third-party devices
IETF standard
MIB name
Required MIB object
Data collected
RFC 1213
MIB-II
mib-2.system
mib-2.interfaces.ifTable
mib-2.ip.ipAddrTable
From mib-2.interfaces.ifTable for interface
level information:
•
ifName/ifDescr
•
ifAlias
•
ifType
•
ifMtu
•
ifSpeed
•
ifPhysAddress
•
ifAdminStatus
•
ifOperStatus
•
ifLastChange
From mib-2.ip.ipAddrTable for IP subnet
information:
•
ipAdEntAddr
•
ipAdEntNetMask
From mib-2.ip.ipAddrTable for Layer 3
topology information:
•
ipForwarding
RFC 2465
IPv6-MIB
ipv6MIBObjects
ipv6NetToMediaTable
ipv6MIBObjects.ipv6AddrTable
From ipv6MIBObjects and
ipv6NetToMediaTable for interface level
information:
•
ifName/ifDescr
•
ifAlias
•
ifType
•
ifMtu
•
ifSpeed
•
ifPhysAddress
•
ifAdminStatus
•
ifOperStatus
•
ifLastChange
From ipv6MIBObjects.ipv6AddrTable for IP
subnet information:
•
ipv6AddrAddress
•
ipv6AddrPfxLength
RFC 2863
IF-MIB
ifMIBObjects.ifXTable
From ifMIBObjects.ifXTable for interface level
information:
•
ifName/ifDescr
•
ifAlias
•
ifType
•
ifMtu
•
ifSpeed
•
ifPhysAddress
•
ifAdminStatus
•
ifOperStatus
•
ifLastChange