Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 2054
1982
Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Configuring packet captures
49
For example, if SNORT is installed under the C:\\SNORT\ directory, enter the following
commands to launch SNORT:
C:\\SNORT\bin\SNORT.exe -c
C:\\SNORT\etc\SNORT.conf -Xeds -K none
6. Specify the working directory for the PCAP-aware tool in the Working Directory text box.
If this field is blank, the default directory is set to the Install_Home\bin directory.
7. Type the name of the PCAP-aware tool in the Name text box.
This name is displayed in the Management application’s event log to identify a message
showing PCAP activity. If this field is blank, the default name “PcapAppl1” is used.
8. Enter the name of the file that will be used to log the output of the sFlow to PCAP conversion in
the Log File text box.
If this field is blank, the process output is logged to the default “PcapApp1.log file in the
working directory.
9. Click OK.