Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 2185)

Brocade Network Advisor SAN + IP User Manual 2113
53-1003155-01
IP main menus
A
Show Panels. Select to choose which panels to display.
All Panels. Select to show all panels.
Topology Map. Select to only show the topology map.
Product List. Select to only show the Product List.
Master Log. Select to only show the Master Log.
Main Display. Select to choose which topology to display
Network Objects. Select to display Network Objects.
L2 Topology. Select to display the L2 topology map.
Ethernet Fabrics. Select to display the Ethernet Fabrics
topology map.
IP Topology. Select to display the IP topology map.
VLAN Topology. Select to display the VLAN topology map.
Host Topology. Select to display the Host topology map.
Enable Flyover Display. Select to enable flyover display.
Show Ports. — Select to show utilized ports on the
selected device.
Map Display Layout. Select to choose a map format.
Organic. Select to set the map format to organic.
Orthogonal. Select to set the map format to orthogonal.
Orthogonal (Merge Lines). Select to set the map format to
orthogonal with merged lines.
Hierarchical. Select to set the map format to hierarchical.
Circular. Select to set the map format to circular.
Free Form. Select to set the map format to free form.
Product Label. Select to configure which product labels
display.
Name + IP. Select to display the product name and IP
address as the product label.
Name. Select to display the product name as the product
label.
IP Address. Select to display the IP Address (IPv4 or IPv6
format) as the product label.
Discover Menu
IP Products. Select to set up IP product discovery.
Rediscover. Select to rediscover devices.
Host Adapters. Select to discover hosts.
VM Managers. Select to discover VM managers.
Add Product Group. Select to create a product
management group.
Menu Command Command Options