Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1520)

1448 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Port VLANs
36
Port VLANs
VLAN Manager facilitates the creation, modification, and deletion of port VLANs on products that
are known to the Management application. It also aids in the bulk deployment of these VLANs. For
example, VLAN 3 can be configured on four products. If the VLAN definition for VLAN 3 is modified,
the new definition can be deployed to all four products at one time.
The Configure Port VLAN function in VLAN Manager allows you to define a port VLAN definition that
adds a new VLAN to a product or modify an existing port VLAN on a product. The port VLANs can be
designated as tagged, untagged, or converged.
Adding or modifying port VLANs
To create or modify port VLANs, complete the following steps.
1. On the VLAN Manager dialog box, click the VLAN View or Product View tab to enable the Add
button.
2. Click Add to add port VLANs or click Edit to modify existing port VLANs.
The Ports tab of the Add VLAN dialog box displays ( Figure 650 ).
FIGURE 650 Add VLAN dialog box - Ports tab
3. Enter a VLAN ID in the Configure VLANs field.
You can enter more than one ID, either by range (for example, 10-20, 30-40) or by separating
individual IDs with a comma (for example, 10, 45, 79, 30). For DCB products, the VLAN ID
range is from 1 through 3583 and for Network OS products the range is from 1 through 8191.
cTag classifiers are supported for Virtual Fabrics and the range is from 2 through 4094.