Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 918
846
Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Network OS switches in VCS mode
20
Viewing LLDP-DCBX parameters on the Network OS switch port
Table 100
describes the LLDP profiles table (in global configuration) and the LLDP profiles.
Viewing the 802.1x parameter on the Network OS switch port
Table 101
describes the parameter that displays on the View Port dialog box - QoS tab.
TABLE 100
LLDP-DCBX parameters on the Network OS switch port
Field/Component
Description
LLDP-DCBX
Indicates whether LLDP-DCBX feature is enabled or disabled.
LLDP Profile Parameters
Displays the following LLDP profile parameters:
•
Name — The name of the LLDP profile.
•
Description — A description of the LLDP profile.
•
Mode — The Transmit and Received mode. Options include Both
Transmit and Received, Transmit Only, or Receive Only.
•
iSCSI Priority — The CoS priority value for iSCSI traffic. The value
range is from COS 0 through COS 7 and the default value is COS 4.
•
Hello — The hello interval time (in seconds) for the bridge. The value
range is from 4 through 180 and the default value is 30.
•
Multiplier — The multiplier (in seconds). The value range is from 2
through 10 and the default is 4.
•
Advertise — The profiles that are configured to advertise. The profile
options are as follows:
-
Port Description
-
System Capabilities
-
System Name
-
System Description
-
Management IP Address
-
Dot 1
-
Dot 3
-
DCBX
-
FCoE Application
-
FCoE Logical Link
-
iSCSI Application
TABLE 101
802.1x parameter on the Network OS switch port
Field/Component
Description
802.1x
Indicates whether 802.1x is enabled or disabled. The 802.1x fields are
hidden if 802.1x authentication is disabled on the port.
Wait Period (sec)
The number of seconds the switch waits before sending an EAP request.
The value range is 15 to 65535 seconds. The default value is 30.
Retry Count
The maximum number of times that the switch restarts the
authentication process before setting the switch to an unauthorized
state. The value range is 1 to 10. The default value is 2.
Quiet Period (sec)
The number of seconds that the switch remains in the quiet state after a
failed authentication exchange with the client. The value range is 1 to
65535 seconds. The default value is 60.
Re-authentication State
Whether the periodic re-authentication of the client is enabled or
disabled. The default is Disable.