Displaying universal ids – Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 1209

Brocade Network Advisor SAN + IP User Manual
1137
53-1003155-01
Disk device decommissioning
25
•
Decommissioned key IDs that have been decommissioned at the key vault are listed in a
table.
•
Universal ID button: Launches the Universal ID dialog box to display the universal ID for
each selected decommissioned key.
You need to know the Universal ID (UUID) associated with the decommissioned disk LUN
key IDs in order to delete keys from the key vault. You can display vendor-specific UUIDs of
decommissioned key IDs. For more information, refer to
•
Delete All button: Deletes all of the listed decommissioned key IDs.
3. Click Delete All to delete the decommissioned keys from the switch. As a precaution, copy the
keys to a secure location before deleting them from the switch. Right-click on an entry in the
table to individually select a key ID. You may also copy or export a single row within the table or
the entire table. To export the keys, right-click and select Export, which will export the key IDs.
Displaying Universal IDs
In order to delete keys from the key vaults, you need to know the Universal ID (UUID) associated
with the decommissioned disk LUN key IDs. To display the Universal IDs, complete the following
procedure:
1. Select Configure > Encryption from the menu task bar to display the Encryption Center
dialog box. (Refer to
Figure 376
on page 976.)
2. Select a switch from the Encryption Center Devices table, then select Switch >
Decommissioned key IDs from the menu task bar.
The Decommissioned Key IDs dialog box displays. (Refer to
Figure 512
.)
3. Select the desired decommissioned key IDs from the Decommissioned Key IDs table, then
click Universal ID.
The Universal IDs dialog box displays the universal ID for each selected decommissioned key.
(Refer to
Figure 513
.)
FIGURE 513
Universal IDs dialog box
4. Click Close.
NOTE
You will need to export the decommissioned key ID to the key vault.