Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 2272
2200
Brocade Network Advisor SAN + IP User Manual
53-1003155-01
IP device properties
E
TABLE 233
VCS fabric properties
Field/Component
Description
Properties tab
Select to display information about the fabric.
Detailed Report button
Click to launch the detailed cluster report.
Name
The name of the fabric.
Alias
The alias name. This is an editable field.
Host Name
The host name associated with the fabric.
System Name
The name of the product.
IP Address
The IP address (IPv4 or IPv6 format) of the product.
Product Type
The fabric’s product type, which is a Layer 2 switch.
VCS Mode
The VCS mode of the switch, which can be enabled or disabled.
VCS ID
The VCS ID configured in the fabric.
Config Mode
The configuration mode of the fabric.
Node Count
The number of fabric nodes in the fabric.
Principal Switch
The name and IP address of the principal switch.
Status
The health status of the cluster.
Admin Status
The administrative status of the switch, for example, Normal.
Memo
Additional comments regarding the switch.
Vendor
The switch vendor.
Model
The switch model type (VDX 6710, VDX 6720, or VDX 6730).
Port Count
The number of ports on the switch.
Firmware
The firmware version and build number.
Location
The physical location of the product. This is an editable field.
Contact
The name of the person or group you should contact about the product,
for example, Technical Support. This is an editable field.
Description
The description of the product.
Connected AP Count
The number of AP devices connected to the device.
Add button
Click to add a user-defined property. For more information, refer to
Edit button
Click to edit a user-defined property. For more information, refer to
Delete button
Click to delete a user-defined property. For more information, refer to
Nodes tab
Select to display information about nodes on the fabric.
Name
The name of the VCS fabric member.
Alias
The fabric member alias name.
Host Name
The host name associated with the VCS fabric member.
System Name
The name of the switch.
IP Address
The IP address of the switch.