Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1339)

Brocade Network Advisor SAN + IP User Manual 1267
53-1003155-01
Troubleshooting FCIP Ethernet connections
27
FIGURE 560 Fabric properties on the FCIP Tunnels dialog box
Troubleshooting FCIP Ethernet connections
1. Right-click a blade an Extension Blade or Switch from the Fabric Tree structure or Connectivity
Map, and select Properties.
2. Select the Port tab.
3. Select GigE from the Type drop-down list.
4. Select an Ethernet port.
5. Click Troubleshooting.
The following options are presented:
- IP Ping — Tests connections between a local Ethernet port (ge0 or ge1) and a destination
IP address.
- IP Traceroute — Traces routes from a local Ethernet port (ge0 or ge1) to a destination IP
address.