Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 280)

210 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Software Configuration
5
4. Enter the polling interval in the PollingIntervalMilliSeconds field.
The default is 5000.
5. Select the ReadNewEventsOnly check box to only read new events.
Configuring TFTP preferences
1. Select Server > Options.
The Options dialog box displays.
2. Select IP Preferences from the Software Configurations list in the Category pane.
3. Enter the number of retries before aborting a read or write transfer in the maxRetries field.
4. Enter the time-out period in milliseconds between retry attempts in the timeout field.
5. Click Apply or OK to save your work.
Memory allocation settings
You can configure memory allocation for the client and server to improve performance. You can
trigger switch polling when a state changes or you can poll at intervals when no state change
occurs.
NOTE
SAN size is a consideration in the selection of polling periods.
Configuring memory allocation settings
To configure memory allocation settings, complete the following steps.
1. Select Server > Options.
The Options dialog box displays.
2. Select Memory Allocation in the Category list to set the memory allocation for the server and
client.
The Memory Allocation pane displays ( Figure 81 ).