Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 1534
1462
Brocade Network Advisor SAN + IP User Manual
53-1003155-01
VLAN routing
36
•
Primary or Secondary options (DCB products only) — Indicates whether the IP address is the
primary or secondary IP address of the VLAN.
•
Type — Select the type of IP address you want to assign to the VLAN. Choose CIDR or
IP/Subnet.
•
Enter the IP address in the fields provided:
-
If you chose the CIDR format, enter a subnet address in the
subnet_address/subnet_mask_bits format (for example, 192.168.2.10/24).
-
If you chose the IP/Subnet format, enter a subnet address in the
subnet_address/subnet_mask format (for example, 192.168.2.10/255.255.255.0).
5. Click the right arrow button to add the IP address to the Selected IP Addresses list. If additional
IP addresses are needed, continue adding them to the SVI and VE. You can assign a maximum
of 255 IP addresses on DCB products and a maximum of 24 IP addresses on IronWare OS
products.
6. Click OK to begin the deployment of the address to the product.
The Deploy IP Configuration dialog box displays (
Figure 656
).
FIGURE 656
Deploy IP Configuration dialog box
7. Click the Deploy now option.
8. Select a Save Configurations option:
•
Click the Save to running option to save the configuration while the system is running.
•
Click the Save to running and startup option to save the configuration both while the system is
running and when the system starts up.
•
Click the Save to running and startup then reboot option to save the configuration both while
the system is running and when the system starts up, and then automatically reboot.
•
Enter a name in the Name field that will be used to identify the configured VLAN.
9. Enter a description in the Description field that will be used to identify the configured VLAN.
10. Click OK to deploy the IP address.