Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 691)

Brocade Network Advisor SAN + IP User Manual 619
53-1003155-01
SMI Agent Configuration Tool
13
By default, the Management application SMI Agent is configured to advertise itself as a
Service Agent (SA). The advertised SLP template shows its location (IP address) and the WBEM
Services it supports. The default advertised WBEM services show the Management application
SMI Agent:
• accepts WBEM requests over HTTP without SSL on TCP port 5988
• accepts WBEM requests over HTTPS using SSL on TCP port 5989
slptool commands
Use the following slptool commands to verify whether the SLP is operating properly.
• slptool findsrvs service:service-agent
Use this command to verify that the Management application SMI Agent SLP service is properly
running as a Service Agent (SA).
Example output: service:service-agent://127.0.0.1,65535
• slptool findsrvs service:wbem
Use this command to verify that the Management application SMI Agent SLP service is properly
advertising its WBEM services.
Example outputs:
service:wbem:https://10.0.1.3:5989,65535
service:wbem:http://10.0.1.3:5988,65535
This output shows the functionalities of the Management application SMI Agent:
• accepts WBEM requests over HTTP using SSL on TCP port 5989
• accepts WBEM requests over HTTP without SSL on TCP port 5988
• slptool findattrs service:wbem:https://IP_Address:Port
NOTE
Where IP_Address:Port is the IP address and port number that display when you use the
slptool findsrvs service:wbem command.
Use this command to verify that Management application SMI Agent SLP service is properly
advertising its WBEM SLP template over the HTTP protocol.
Example output:
Install_Home\cimom\bin>slptool findattrs service:wbem:http://10.24.35.61:5988
(template-type=wbem),(template-version=1.0),(template-description=This
template describes the attributes used for advertising WBEM Servers),
(template-url-syntax=http://10.24.35.61:5988),(service-hi-name=WBEM Solutions
J WBEM Server),(service-hi-description=WBEM Solutions J WBEM Server),
(service-id=WBEMSolutions:f1f65c3b-27f1-4b70-9ced-e412e93a8d5e),(Communicatio
nMechanism=CIM-XML),(OtherCommunicationMechanismDescription =null),
(InteropSchemaNamespace=interop),(ProtocolVersion=1.2),
(FunctionalProfilesSupported=Basic Read,Basic Write,Schema Manipulation,
Instance Manipulation,Association Traversal,Query Execution,Qualifier
Declaration,Indications),(FunctionalProfileDescriptions=null),(MultipleOperat
ionsSupported=true),(AuthenticationMechanismsSupported=Basic),(Authentication
MechanismDescriptions=null),(Namespace=root/brocade1,interop),(Classinfo=0,0)