Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1787)

Brocade Network Advisor SAN + IP User Manual 1715
53-1003155-01
IP Traffic analyzer monitoring and sFlow reports
43
Viewing IPv4 – top UDP talkers
The Top IPV4–UDP Talkers report shows the top users of IPv4 UDP services. Complete the following
steps to display the report.
1. Select Monitor > Traffic Analysis > Monitor sFlow.
2. On the Monitor sFlow dialog box, choose one of the following options:
• To view a report for a device group, click the report icon for the device group you want.
• To view a report for a device, click the name of the device group to which the device
belongs, and on the Device list page, click the report icon for the device.
3. In the Category list, select L3/L4 Reports.
4. In the Reports list, select IPV4.
5. In the next list, select UDP.
The report shows the following information:
• IPV4
- Source - The source IP addresses of the IPv4 traffic. If enabled, host names of the IP
address are shown in parentheses.
- Destination - The destination IP addresses of the IPv4 traffic. If enabled, host names of the
IP address are shown in parentheses.
- TOS/DSCP - The TOS bit value or the Differentiated Services Code Points (DSCP) value in
the packets.
• Port - For VCS fabrics, the send and receive ports are from different devices.
- In - The ID of the port on which the traffic is being received.
- Out - The ID of the port on which the traffic is being sent.
• UDP
- Src Port - ID of the port on which the UDP packet originated. The value shown in this
column can be one of the following values:
 ID of the well-known port.
 The term “various,” if the value is greater than 1023 (threshold for well-known ports)
and if the port number on the other side of the connection is an ephemeral port.
- Dest Port - ID of the port on which the UDP packet was received. The value shown in this
column can be one of the following values:
 ID of the well-known port.
 The term “various,” if the value is greater than 1023 (threshold for well-known ports)
and if the port number on the other side of the connection is an ephemeral port.
• User (802.1X)
- Source - Name of the user who originated the traffic. This name is the ID the client used to
gain access to the network.
- Destination - Name of the user who received the traffic. This name is the ID the client used
to gain access to the network.
• Frames - Size of the traffic in frames.
• Mbytes - Size of the traffic in megabytes for the time duration shown on the report.