Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1976)

1904 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Viewing historical reports for all configuration policy managers
47
- Condition Details — Details about the condition.
- Remediation — Details how to correct the failure, if the condition fails.
Host Checks — Switch checks provide the following information for each selected check:

Name — Product name.

Status — Result of the check and reason for failure if known. Valid results include
Passed, Partially Failed, Failed, Not Applicable, and Unknown.
Displays the Host name and status of the policy check for the following option:

Host — Check for at least Configured_Minimum_Value connections to attached fabrics

Host — Check for connections through two fabrics to each target LUN. This check
provides the following additional detail for this check:
- LUN Serial # — LUN serial number.
- Adaptor Port — Host adapter port number.
- Fabric — Fabric name.
- Storage Port — Storage port number.
5. Click the close button (X) on the Policy_Name - Configuration Policy Manager Report browser
window.
6. Click Close on the Configuration Policy Manager dialog box.
Exporting a configuration policy manager report
1. Click Export.
The File Download dialog box displays.
2. Click Save.
The Save dialog box displays.
3. Browse to the file location where you want to save the report and click Save.
4. Click the close button (X) on the Policy_Name - Configuration Policy Manager Report browser
window.
Viewing historical reports for all configuration policy managers
1. Select Monitor > Configuration Policy Manager.
The Configuration Policy Manager dialog box displays.
2. Click History.
The Report History dialog box displays the last 10 reports run for all monitors. The Report
History dialog box retains up to 10 reports for each configuration policy manager.
• Name — Name of the configuration policy manager.
• Date — Date and time the report was finished.
• Result — Result of the configuration policy manager run. Valid results include Passed,
Partially Failed, Failed, Not Applicable, and Unknown.