Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 2277)

Brocade Network Advisor SAN + IP User Manual 2205
53-1003155-01
IP device properties
E
Fabric and Edge Ports properties
•
Identifier — The identifier of the port.
•
Name — The name of the port. This is an editable field. Enter a
name (up to 64 characters) for the port.
•
MAC Address — The MAC address of the port.
•
Port Status — The status of the port.
•
Port State — The state of the port.
•
Type — The port type.
•
Speed — The speed of the port.
•
L2/Tag Mode — Indicates whether L2 tag mode is enabled or
disabled.
•
Untagged VLAN ID — The untagged VLAN identifier of the port.
•
Duplex Mode — The duplex mode of the port.
•
Role — The role of the port. Possible values include the following
roles:
-
Fabric
-
Edge
-
Stacking
•
Profile Mode — Displays the profile mode status of the port; for
example, Enabled or Disabled.
•
Active Profiles — Displays the active profiles associated with the
port.
•
Port Profile Domains — Displays the port profile domain name.
•
Attached Device [MACs] — Displays the MAC address of the
attached device.The value is empty when the port is not connected.
The value contains a comma-separated list of MAC addresses when
more than one MAC address is found.
•
LAG/Trunk ID — Displays the LAG or trunk ID.
•
Flex Port — Displays the ports that support Ethernet or Fibre
Channel.
TABLE 233 VCS fabric properties (Continued)
Field/Component Description