Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 2490)

2418 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Database tables and fields
I
OUT_PORT_TYPE Port type of the outgoing traffic interface. For VCS
member the value of,
•
0 means its edge port
•
1 means its fabric port.
For other devices Default value is 0
smallint
L3_SRC_ADDR This column is used to store the L3 address of the
source in the received sFlow packet. bytea
L3_DEST_ADDR This column is used to store the L3 address of the
destination in the received sFlow packet. bytea
TABLE 359 SFLOW_MINUTE_MAC_SLNUM
Field Definition Format Size
MAX_SLNUM Maximum row count. bigint
TABLE 360 SFLOW_MINUTE_SUMMARY
Field Definition Format Size
SLNUM This column is used to store a counter value to
identify the total row count. bigserial
TIME_IN_SECONDS Data collection time in seconds. int
DEVICE_ID ID of the product which sends the sflow traffic. int
FRAMES Number of frames transmitted through the sflow
sample collected. bigint
BYTES Number of bytes transmitted through the sflow
sample collected. bigint
IN_PORT_TYPE Port type of the incoming traffic interface. For VCS
member the value of,
•
0 means its edge port
•
1 means its fabric port.
For other devices Default value is 0.
smallint
OUT_PORT_TYPE Port type of the outgoing traffic interface. For VCS
member the value of,
•
0 means its edge port
•
1 means its fabric port.
For other devices Default value is 0
smallint
TABLE 361 SFLOW_MINUTE_VLAN
Field Definition Format Size
SLNUM This column is used to store a counter value to
identify the total row count. bigserial
TIME_IN_SECONDS Data collection time in seconds. int
DEVICE_ID ID of the product which sends the sflow traffic. int
FRAMES Number of frames transmitted through the sFlow
sample collected. bigint
TABLE 358 SFLOW_MINUTE_MAC (Continued)
Field Definition Format Size