Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1879)

Brocade Network Advisor SAN + IP User Manual 1807
53-1003155-01
Predefined flow definition templates
44
• LUN Monitoring — Use this Add Flow Definition-LUN Monitoring dialog box to define
unidirectional Monitor flow between a source and a destination device with the LUN
details. Refer to
“Configuring LUN Monitoring predefined template” on page 1811" for
more information.
Configuring Static Flow template
The Static Flow predefined template receives the source device details from the storage array,
searches all the zones where the source device is a member, iterates through all the zone
members and receives each initiator or initiator with target port details, and creates flow definition
row using the device port and source port details as shown in
Figure 810 .
FIGURE 811 Add Flow Definition - Static Flow template dialog box
Perfom the following steps, in the Add Flow Definition - Static Flow dialog box:
The default Device View is Port Address.
1. The Flow Name field is filled with the predefined flow name and the format is
__WWN>.
2. Select one of the following format options for Device View list:
• Port Address (port ID) — Select to display the source and destination device address using
the port ID. The default Device View is Port Address.
• WWN (world wide name) — Select to display the source and destination device address
using the port WWN.
3. Click Show Details to view information about the Target Switch, Ingress, and Egress ports
based on the selected device details.
This data is not editable. Click Hide Details to hide the Target Switch, Ingress, and Egress port
information.