Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 2262
2190
Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Viewing SAN device properties
E
Compression
Whether compression is enabled or disabled.
Connected Devices
The number of connected devices. Click the icon in the right side of the
field to open the Virtual FCoE Port
box.
Connected Switch
The name of the connected switch.
Delete button
Click to delete the ports.
Description
A description of the customer site.
Destination IP Address
The IP address of the of the FCIP tunnel destination device.
Device Type
Whether the device is an initiator or target.
Discovery Status
The discovery status of the switch. Examples include “Discovered: Seed
Switch” and “Discovered: Not Reachable”.
Distance Actual (km)
The actual distance (in km) for end port connectivity.
Distance Estimated (km)
The estimated distance (in km) for end port connectivity.
Domain ID
The device’s domain ID, which is the top-level addressing hierarchy of the
domain.
Encryption
Whether encryption is enabled or disabled.
Fabric
The fabric’s IP address.
Fabric Name
The name of the fabric.
Fabric Watch
Whether Fabric Watch is up or down.
Fastwrite
Whether fastwrite is on or off for the FCIP tunnel.
FC Port
The FC port of the FCIP tunnel.
FC Port Count
The number of FC ports on the device.
FCIP Capable
Whether the port is FCIP capable.
FCoE Capable
Whether the device is Fibre Channel over Ethernet capable.
FCS Role
Whether FCS is supported.
Flag (FICON related)
Whether a flag is on or off.
Firmware
The firmware version.
Forward Error Correction (FEC)
Whether FEC is enabled or disabled.
GigE Port
The GigE port of the FCIP tunnel.
GigE Port Count
The number of GigE ports on the device.
Host Name
The Host name.
IKE Policy #
The IKE policy number. Also includes the following information:
•
Authentication Algorithm
•
Encryption Algorithm
•
Diffie-Hellman
•
SA Life
Inband Management Status
The inband management status (online or offline).
Index
The index of the Virtual FCoE Port.
Interface Count
The interface count.
TABLE 228
Port properties (Continued)
Field
Description