Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual

Page 2179

Brocade Network Advisor SAN + IP User Manual

2107

53-1003155-01

SAN main menus

Recommission — Select to recommission an individual
port or all ports on a blade or switch.

Routing — (Trial and Licensed version Only) Select to
manage a selected router.

Configuration — (Trial and Licensed version Only) Select
to view the R_Ports on a router.

Domain IDs — (Trial and Licensed version Only) Select to
configure the router domain IDs.

Security — Select to manage security.

L2 ACL — Select to configure Layer 2 Access Control Lists
on products and ports.

Switch Password Management — Select to manage
password.

Swap Blades — (Trial and Licensed version Only) Select to
swap blades.

Virtual Fabric — (Trial and Licensed version Only) Select to
configure logical switches for your SAN.

Enable — (Trial and Licensed version Only) Select to
enable virtual fabrics for your SAN.

Disable — (Trial and Licensed version Only) Select to
disable virtual fabrics for your SAN.

Logical Switches — (Trial and Licensed version Only)
Select to configure logical switches for your SAN.

Locate Logical Switches — (Trial and Licensed version
Only) Select to locate logical switches.

Locate Chassis — (Trial and Licensed version Only) Select
to locate the chassis.

VLANs — Select to launch the VLAN Manager.

Zoning — Select to configure zones.

Fabric — Select to configure fabric zones.

LSAN Zoning (Device Sharing). (Trial and Licensed version
Only) Select to configure LSAN zones.

Set Change Limits — Select to set zone limits for zone
activation.

List Zone Members. (Trial and Licensed version Only)
Select to display all members in a zone.

Command

Command Options