Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 1157
Brocade Network Advisor SAN + IP User Manual
1085
53-1003155-01
Adding a switch to an encryption group
25
The dialog box contains the following information:
•
Encryption Groups table: Enables you to select an encryption group in which to add a
switch.
•
Member Switches table: Lists the switches in the selected encryption group.
NOTE
If you are creating a new encryption group, refer to
“Creating a new encryption group”
FIGURE 470
Add Switch to Existing Encryption Group dialog box
5. Select the group in which to add the switch, then click Next.
The Specify Public Key Certificate (KAC) File Name dialog box displays. (Refer to
Figure 471
.)