Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1876)

1804 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Predefined flow definition templates
44
FIGURE 807 List of preconfigured flow templates
The Add Flow - predefined_flow dialog box displays, as shown in ( Figure 808 ).
FIGURE 808 Sample Add Flow - predefined_monitor dialog box
3. Enter a name for the flow definition in the Flow Name field.
4. Select one of the following format options from the Device View list:
• Port Address (port ID) — Select to display the source and destination device address using
the port ID.
• WWN (world wide name) — Select to display the source and destination device address
using the port WWN.
5. Enter the port ID or WWN of the source port in the Source field or click the ellipsis button to
select a port from the list.
Enter an asterisk (*) to use any port. To select the source port from a list, refer to “Selecting an
end device port from a list of available device ports” on page 1743".
6. Enter the port ID or WWN of the destination port in the Destination field or click the ellipsis
button to select a port from the list.