Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1476)

1404 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Previewing CLI commands
34
To import parameter values, complete the following steps.
1. Click Import on the Parameters tab of the CLI Template dialog box.
The Open dialog box displays.
2. Browse to the location of the parameters (CSV) file.
3. Click Open.
The parameters specified in the CSV file display in the Parameters table. Note that the Target
column remains visible at all times in the Parameters table.
You can copy and paste new values for the parameter from an external file (plain text or table
format). If the file you copy from is in table format, you can copy multiple fields (cells) at the
same time.
Previewing CLI commands
1. Select a row in the Parameters table.
2. Click Preview.
The Preview of CLI Commands with Parameter Values dialog box displays.
FIGURE 631 Preview of CLI Commands with Parameter Values dialog box
3. Click Close.
TABLE 130 Different values for each target
#Description of the template. This template provides different values for each target..
Target, LOOPBACK_INTERFACE|INTEGER, OSPF_AREA|INTEGER LOOPBACK_INTERFACE_IP|STRING
10.20.30.100, 1, 4, loopback1,
10.20.30.200, 2, 5, loopback2,
Layer 2 Switch Products, 3, 6, loopback3,
TABLE 131 Same value for each target
#Description of the template. This template provides different values for each target..
Target, LOOPBACK_INTERFACE|INTEGER, OSPF_AREA|INTEGER LOOPBACK_INTERFACE_IP|STRING
All, 1, 4, loopback1,