Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 2189)

Brocade Network Advisor SAN + IP User Manual 2117
53-1003155-01
IP main menus
A
Pseudo Events. Select to configure pseudo events.
Event Actions. Select to configure events actions.
Logs. Select to display logs.
Audit. Select to display a history of user actions
performed through the application (except login/logout).
Product Event. Select to display errors related to SNMP
traps and Client-Server communications.
Product Status. Select to display operational status
changes of managed products.
Security. Select to display security information.
Syslog. Select to display Syslog events related to the
selected device or fabric.
SNMP Setup. Select to configure SNMP traps.
Trap Forwarding. Select to configure trap forwarding.
Product Trap Recipients. Select to register a host as a
trap recipient.
Event Reception. Select to configure the server to accept
or drop traps and specify SNMP credentials and
community strings, which are required to decode traps on
receiving them.
Informs — Select to configure informs.
Syslog Configuration. Select to configure Syslog for the
management server.
Syslog Forwarding. Select to configure Syslog forwarding.
Product Syslog Recipients. Select to register a host as a
syslog recipient.
Technical Support. Select to configure technical support
data.
SupportSave. Select to capture server and client support
data.
Product/Host SupportSave. Select to configure technical
support data collection.
View Repository. Select to view repository data.
Reports Menu
Event Custom Reports. Select to generate custom event
reports.
Wired Products. Select to run a wired product report.
AP Products — Select to run an AP product report.
Modules. Select to run a report on modules.
VLANs. Select to run a VLAN information report.
IP Subnets. Select to run a report of IP subnets on the
network.
Menu Command Command Options