Top port c3 discards monitor – Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 356
284
Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Dashboard customization
7
Top Port C3 Discards monitor
The Top Port C3 Discards monitor displays the top ports with Class 3 frames discarded in a table.
There are four port widgets: All, ISL, Initiator, and Target.
The Top Port C3 Discards monitor includes the following data:
•
Widget title — The name of the widget.
•
View Details icon — Click to launch the Detailed View page.
•
Widget summary — The product count for each status (worst to best) displays underneath the
widget title.
•
Top value — The highest value in the table.
•
Port — The port affected by this monitor. Click to launch the Port Page (refer to
on page 325). When you launch the Port page, the detailed view closes.
•
Connected_Port (where Connected_Port is Connected Port, Initiator, or Target) — Displays the
address of the port:
•
C3 Discards/sec — The number (error rate) of Class 3 discard errors per second for the
duration specified in the monitor.
•
C3 Discards — The number (error count) of Class 3 discard errors for the duration specified in
the monitor.
Viewing additional details for the Top Port C3 Discards monitor
1. Click the View Details icon.
A more detailed widget displays which includes the following data:
•
Scope — The scope configured for the dashboard.
•
Port — The port affected by this monitor. Click to launch the Port Page (refer to
on page 325). When you launch the Port page, the detailed view closes.
•
Connected_Port (where Connected_Port is Connected Port, Initiator, or Target) — Displays
the address of the port:
•
C3 Discards/sec — The number (error rate) of Class 3 discard errors per second for the
duration specified in the monitor.
•
C3 Discards — The number (error count) of Class 3 discard errors for the duration specified
in the monitor.
•
Product — The product affected by this monitor.
•
Type — The type of port (for example, U-Port).
•
Identifier — The port identifier.
•
Port Number — The port number.
•
State — The port state (for example, Enabled).
•
Status — The port status (for example, Up).
2. Click the close (X) button.