Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual

Page 2177

Brocade Network Advisor SAN + IP User Manual

2105

53-1003155-01

SAN main menus

Host Adapters — Select to discover hosts.

VM Managers — Select to discover VM managers.

VCEM Managers — Select to discover Virtual Connect
Enterprise Managers.

Host Port Mapping — (Trial and Licensed version Only)
Select to manually map HBA ports to a host.

Storage Port Mapping — (Trial and Licensed version Only)
Select to manually map Storage Ports to a Storage Device
or other Storage Ports.

Configure Menu

Element Manager — Select to configure the selected
device.

Hardware — Select to launch the Element Manager or
Web Tools application for the selected device.

Ports — Select to launch Web Tools - Port Administration
for the selected device.

Admin — Select to launch Web Tools - Switch Adm in i st
raton for the selected device.

Router Admin — Select to launch Web Tools - FCR
Administration for the selected device.

Name Server — Select to launch Web Tools - Name Server
for the selected device.

HCM — (HBA or CNA only) Select to launch the HCM Agent
for the selected device.

Enable/Disable — Select to enable or disable Virtual
Fabrics, switches, and ports.

Enable — Select to enable Virtual Fabrics, switches, and
ports.

Disable — Select to disable Virtual Fabrics, switches, and
ports.

Persistent Enable — Select to persistently enable ports.

Persistent Disable — Select to persistently disable ports.

Allow/Prohibit Matrix. (Enterprise Licensed version Only)
Select to allow FICON users to configure an Allow/Prohibit
Matrix table. You can select any matrix tables and
compare them either vertically or horizontally.

Configuration — Select to manage the selected device.

Save — Select to save device configurations to the
repository.

Save Running to Startup — Select to save the DCB
running configuration to the startup configuration on
selected switches. Requires at least one discovered DCB
switch.

Restore — Select to restore device configurations from
the repository.

Command

Command Options