Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 820)

748 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Port profiles
18
FIGURE 293 Assign MACs dialog box
6. From the Source list, select Virtual Machine Managers or Switch Port Connectivity as the
source of the discovered MAC address.
7. Select a discovered MAC address to assign to the port profile and click the right arrow button to
add it to the Selected MACs list.
8. Click OK.
Managing offline MAC addresses
To add unique MAC addresses to the Discovered MACs list where you can assign them to a port
profile, complete the following steps.
1. Select a VCS-capable switch from the device tree.
2. Right-click and select Properties.
The Fabric Properties dialog box displays.
3. Click the Port Profiles tab.
4. In the Selected Profile Details area, click the Associated MACs tab.
5. Click Add.
The Assign MACs dialog box displays.
6. Click Add Offline MACs.
The Assign Offline MACs dialog box displays, as shown in Figure 294 . Use this dialog box to
add, remove, or import offline MAC addresses.