Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1736)

1664 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
IP historical performance monitoring
43
• Name - Collector Basics page
• Device or port level - Collector Basics page
• Polling interval - Collector Basics page
• Schedule setting - Collector Basics page
• MIB selection - MIB Object page
• Expression selection - Expression page
• MIB index - MIB Index page
NOTE
The MIB Index page for system collectors will not show because you cannot configure the MIB
index for system collectors.
Displaying historical data collectors
Select Monitor > Performance > Historical Data Collectors to display configured historical data
collectors.
FIGURE 748 Historical Data Collectors dialog box
All configured data collectors are listed, showing the following information:
• Name - The name of the data collector.
• Enabled - Whether or not the data collector is enabled (Yes) or disabled (No).
NOTE
The Netiron Ether Stats Collector and NOS Ethernet Port Optics Collector will be disabled by default.
• Polling Interval - The time interval, in minutes, between attempts to contact the information
source and gather data.
NOTE
The Polling Interval for NOS ethernet port optics collector is 30 minutes.