Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 2227
Brocade Network Advisor SAN + IP User Manual
2155
53-1003155-01
About user privileges
D
Fault Management
Allows you to control
access to the SNMP Trap
Registration and
Forwarding dialog box,
the Event Storage option
of the Options dialog box,
the Syslog Registration
and Forwarding dialog
box, as well as the Export
and Clear functions in the
Event Log dialog box and
the Show and Hide
functions in the
Customize Columns
dialog box.
Disables the SNMP Trap
and Syslog configuration
commands from the
Monitor menu.
Disables the Event
Storage option on the
Options dialog box.
If you do not have other
read/write privileges to
Options dialog box
functions, disables the
Server > Options
command.
Enables the Logs >
Monitor menu.
Enables the SNMP Trap
and Syslog configuration,
commands from the
Monitor menu.
Enables the Event
Storage option on the
Options dialog box.
Enables the Server >
Options command.
Only enables the Cancel
function for the dialog box
boxes.
Enables the Logs >
Monitor menu.
Enables the SNMP Trap
and Syslog configuration,
commands from the
Monitor menu.
Enables the following
functions from the dialog
box boxes:
•
configure
Management server
registration
•
configure TRAP or
Syslog forwarding
•
register other
servers as a
recipient
•
apply changes
Enables the Server >
Options command.
Enables the Event
Storage option on the
Options dialog box.
Enables the following
functions from the dialog
box:
•
configure max
events
•
configure event
purging policy
•
apply changes
Enables the following
functions from the Master
Log right-click menu:
•
Clear events
•
Show events
•
Hide events
•
Export events
Note that the Export
command on the Master
Log right-click menu also
requires the Export
privilege because it
launches the Export
dialog box.
Enables the Clear and
Export buttons on the
individual log dialog box
boxes.
FCoE Management
Allows you to configure
FCoE devices.
Disables the FCoE
command from the
Configure menu.
Enables the FCoE
command from the
Configure menu.
Disables all commands
and functions on the
dialog box except the
Close and Help.
Enables the FCoE
command from the
Configure menu.
Enables all commands
and functions on the
dialog box.
TABLE 218
Application privileges and behavior (Continued)
Privilege
Description
No Privilege
Read-Only
Read/Write