Events – Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 403
Brocade Network Advisor SAN + IP User Manual
331
53-1003155-01
Events
7
•
Port Type — Displays the type of port, for example, U_port.
•
Port WWN — Displays the port’s world wide name.
•
Protocol — Displays the network protocol, for example, Fibre Channel.
•
Long Distance Settings — Displays whether the connection is considered to be normal or
longer distance.
•
Forward Error Correction(FEC) — Displays whether FEC is enabled or disabled.
•
Encryption — Displays whether encryption is enabled or disabled.
•
Compression — Displays whether compression is enabled or disabled.
•
NPIV Enabled — Displays whether the port is NPIV enabled or not.
•
Connected Switch — Displays the name of the connected switch.
•
Attached Port# — Displays the port number of the attached product.
•
Calculated Status — Displays the calculated operational status.
•
Zone Alias — Displays the zone alias of the port.
For GigE port properties, the Details area displays the following data for the selected port.
•
Speed (Gb/s) — Displays the port speed, in Gbits per second.
•
LAG ID — Displays the link aggregation group identifier.
•
L2 Mode — Displays the Layer 2 mode. Options include Access, Converged, or Trunk.
•
Routing Policy — Displays the routing policy configured on the switch.
•
VLAN ID — Displays the VLAN identification number.
•
IPSEC Supported — Displays the IPSec policy number.
For Ironware port properties, the Highlights area displays the following data for the selected
port.
•
Identifier — Displays the identifier of the port.
•
Name — Displays the name of the port.
•
MAC Address — Displays the MAC address of the port.
•
Port Status — Displays the status of the port.
•
Port State — Displays the state of the port.
The Details area displays the following data for the selected port.
•
Type — Displays the type of port.
•
Speed (Gb/s) — Displays the port speed, in Gbits per second.
•
L2/Tag Mode — Displays whether the port is tagged or untagged.
•
Untagged VLAN ID — Displays the untagged VLAN identifier of the port.
•
Duplex Mode — Displays the duplex mode of the port.
•
Role — Displays the role of the port (such as Fabric, Edge, Stacking, or Peri Port). For MCT
switches, the port role is either ICL or MCT.
Events
Click the Events icon to display the Events page.