Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 2268)

2196 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
IP device properties
E
Principal Switch The identifier of the principal switch.
Config Mode The configuration mode.
Device Type The type of device.
Serial # The serial number of the product.
Status The status for the product and the port.
Admin Status The admin status of the product. Options include:
Normal mode
Troubleshooting mode
Memo Additional information about the product.
Vendor The name of the product’s vendor.
Model The model number of the product.
Port Count The number of ports on the product.
Firmware The firmware version of the product.
Build Label The firmware build number.
FDMI Serial Number The serial number of the FDMI.
FDMI Firmware The FDMI firmware version and build number.
FDMI Driver version The FDMI driver version.
FDMI Manufacturer The manufacturer of the FDMI.
Location The physical location of the product.
Contact The name of the person or group you should contact about the product.
Description The description of the product.
Connected AP count Number of APs connected to the controller or switch.
Managed AP count Only applicable to the selected controller. Number of APs that the
selected controller manages.
Controller cluster mode Only applicable to the selected controller. Cluster mode of the controller:
Active, Standby and None.
Controller cluster name Only applicable to the selected controller. Cluster name.
Controller cluster members Only applicable to the selected controller. IP addresses of the controller
cluster peers.
TABLE 232 IP device and port properties (Continued)
Field/Component Description