Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 2350)

2278 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Database tables and fields
I
NAT_PRIVATE_IP_ADDRESS NAT private IP Address. Feature available from NMS
DC Eureka release onwards. During a successful NAT
translation the Private IP that gets translated will be
stored in this field. The new translated IP Address will
be stored in the existing IP_ADDRESS field. All the
NAT look up will be done using the NAT Private IP
Address. varchar 128
ALTERNATE_IP_ADDRESS Alternate IP address of the switch. Feature available
from Eureka release onwards. During fabric discovery
the column will be populated based on the values in
the fabricinfo.html. If Management application server
is IPV6 capable, then we store the switchetherIP NVP
else we store the switchetherIPV6. So could be either
IPV4 or IPV6 address. If there exists any NAT
translation, translated IP will be used. varchar 128
MAC_ADDRESS Stores the VCS Mac Address. The value will be
populated by the FabricCollector. Default value is
empty string. The management interface Mac
Address will be stored here. varchar 64
TABLE 71 CORE_SWITCH_CAPABILITY
Field Definition Format Size
CORE_SWITCH_ID * DB ID. int
CAPABILITY_ * Name of the capability detected on the core switch. varchar 256
ENABLED 1 = the capability is enabled on the core switch.
Default value is 0. int
TABLE 72 CORE_SWITCH_CHECKSUM
Field Definition Format Size
CORE_SWITCH_ID * DB ID. int
CHECKSUM_KEY * Checksum type. varchar 32
CHECKSUM Checksum value. varchar 16
TABLE 73 CORE_SWITCH_COLLECTION
Field Definition Format Size
CORE_SWITCH_ID * Core switch ID. int
COLLECTION_NAME * Collector name. varchar 256
LAST_CORE_SW_
MODIFICATION Last core switch modification time. timestamp
TABLE 74 CORE_SWITCH_DETAILS
Field Definition Format Size
CORE_SWITCH_ID* Primary key for the table. int
ETHERNET_MASK Ethernet mask of the core switch IP address. char 64
TABLE 70 CORE_SWITCH (Continued)
Field Definition Format Size