Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 744)

672 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Ports
14
Enabling a port
To enable a port from the port connectivity view, right-click the port you want to enable from the
Port Connectivity View dialog box and select Disable/Enable Port > Enable.
Disabling a port
To disable a port from the port connectivity view, right-click the port you want to disable from the
Port Connectivity View dialog box and select Disable/Enable Port > Disable.
Filtering port connectivity
To filter results from the port connectivity view, complete the following steps.
1. Click the Filter link from the Port Connectivity View dialog box
The Filter dialog box displays ( Figure 278 ).
FIGURE 278 Filter dialog box
2. Click a blank cell in the Field column to select the property from which to filter the results.
3. Click a blank cell in the Relation column to select an action operation.
The following actions are available:
• ==
• !=
• <
• >
• <=
• >=
• contains
• matches
4. Define a filter by entering a value that corresponds to the selected property in the Value
column.
5. Repeat steps 2 through 4 as needed to define more filters.
6. Click OK.