Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 2224
2152
Brocade Network Advisor SAN + IP User Manual
53-1003155-01
About user privileges
D
TABLE 218
Application privileges and behavior
Privilege
Description
No Privilege
Read-Only
Read/Write
Active Session
Management
Allows you view active
client sessions and
disconnect an unwanted
user.
Disables the Active
Sessions command from
the Server menu.
Enables the Active
Sessions command from
the Server menu.
Disables all commands
and functions on the
dialog box except the
Close and Help.
Enables the Active
Sessions command from
the Server menu.
Enables all commands
and functions on the
dialog box.
Call Home
Allows you to configure
call home centers,
devices, and event filters.
Disables the Call Home
command on the Monitor
> Event Notification
menu.
Enables the Call Home
command on the Monitor
> Event Notification
menu. Enables the Add,
Edit, Remove, Edit
Centers, and Show/Hide
Centers buttons as well
as the Enabled check
boxes on the dialog box;
however, disables the OK
and Apply buttons on the
Call Home, Call Home
Event Filter, and
Configure Call Home
Center dialog box boxes.
Enables the Call Home
command on the Monitor
> Event Notification
menu. Enables all
functions in the dialog
box.
Certificate Management
Allows you to access the
Certificate Management
dialog box and manage
server truststores.
Disables Certificates on
the Options dialog box.
Enables Certificates on
the Options dialog box.
Only viewing of the
certificates is supported.
Enables Certificates on
the Options dialog box.
Enables all functions in
the dialog box.
Configuration
Management
Allows you to access the
Configuration
Management dialog box
and perform
configuration upload and
replication.
Disables Save, Restore,
Configuration Repository,
and Schedule Backup
under Configure > Switch
and the Configuration
command under
Configure > Switch >
Replicate.
Enables Configuration
Repository under
Configure > Switch.
Only viewing of saved
configuration is
supported.
Configuration upload and
replication are disabled.
Enables all commands
under Configure > Switch.
Allows you to perform
configuration upload,
download and restore.