Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1509)

Brocade Network Advisor SAN + IP User Manual 1437
53-1003155-01
Unified image management
35
FIGURE 640 Firmware Management dialog box -Summary Page pane
9. Review the information on the Summary Page pane.
• The Deployment And Targets tab shows the deployment definition and the targets in the
configuration. The Selected Targets list in table format allows you to verify to which devices the
payloads in the configuration are deployed.
• The Configuration tab summarizes the payloads in the configuration you have created.
10. Click Deploy.
The Deployment Status dialog box displays, as shown in Figure 641
FIGURE 641 Firmware Management dialog box -Deployment Status pane
The product group name is displayed in the Group Name column if the product group is
selected in the Deployment Targets pane.
The Progress column shows whether the test is not started, in progress, or finished. Initially the
Progress column will be in Not Started state for all the selected targets.
The Status column shows the overall status (Success, Failed, or Skipped) of the deployment. If
Stop on Failure is selected, the Status column will display Skipped for the devices that failed
during deployment.