Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 1437
Brocade Network Advisor SAN + IP User Manual
1365
53-1003155-01
Change tracking
32
FIGURE 611
Configuration File Manager dialog box - Change Tracking tab
The Configuration Change Tracking list displays the following information:
•
Name — The product name and IP address.
•
Baseline Time — The date and time when the baseline configuration for the device was
copied into the repository of the management server.
•
Backup Time — The time when the last backup attempt occurred for the selected device.
•
Change Status — The change status of the latest device backup.
•
Configuration Type — The type of configuration (running or startup state).
•
Backup Type — How the backup was obtained. Backup options include the following types:
-
Discovery — Obtained after the discovery process.
-
Pre-deployment — Occurs before a configuration change is deployed to the device.
-
Post-deployment — Occurs after a configuration change is deployed to the device.
-
Running Config Change Trap — Occurs when a running configuration is changed.
-
Adaptive — Occurs when a configuration change is deployed to the device during the
lazy polling interval time. The polling interval is 15 minutes for all the network sizes.
For Adaptive backup, make the following configurations:
-
Enable DoAdaptiveBackupForNOS on the Options dialog box (refer to
-
Register the server with the product for SNMP traps (refer to