Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 629)

Brocade Network Advisor SAN + IP User Manual 557
53-1003155-01
Editing a Call Home center
11
FIGURE 236 Configure Call Home Center dialog box (Brocade, IBM, NetApp, or Oracle E-mail option)
4. Make sure the Call Home center type you selected displays in the Call Home Centers list.
If the Call Home center type is incorrect, select the correct type from the list.
5. Select the Enable check box to enable this Call Home center.
6. Enter your contact name in the Customer Details - Name field.
7. Enter your company name in the Customer Details - Company field.
8. Enter the phone number of the customer contact in the Customer Details - Phone (Office) field.
9. Enter the mobile phone number of the customer contact in the Customer Details - Phone
(Mobile) field.
10. Enter the name of the e-mail server in the SMTP Server Settings - Server Name field.
11. Select the SMTP over SSL check box to enable secure communication between the SMTP
server and the Management application.
12. Enter the port number of the server in the SMTP Server Settings - Port field.
The default is 465 if SMTP over SSL is enabled; otherwise, the default is 25.
13. Enter a user name in the SMTP Server Settings - Username field.
This is a required field when the SMTP server authentication is enabled.
14. Enter a password in the SMTP Server Settings - Password field.
This is a required field when the SMTP server authentication is enabled.
15. Enter your e-mail address in the E-mail Notification Settings - Reply Address field.
You can enter more than one e-mail address, separating each with a semi-colon. To send a text
message or page by way of e-mail, use the following format: [email protected] (where
number is your phone number and carrier.com is the SMS server; for example,
[email protected] (text message) or [email protected] (page)).
NOTE
Check with your carrier for the exact e-mail address format.
This e-mail address must be a registered MyBrocade member.