Top port link resets monitor – Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 363
Brocade Network Advisor SAN + IP User Manual
291
53-1003155-01
Dashboard customization
7
Top Port Link Resets monitor
The Top Port Link Resets monitor displays the top ports with link resets in a table.
The Top Port Link Resets monitor includes the following data:
•
Widget title — The name of the widget.
•
View Details icon — Click to launch the Detailed View page.
•
Widget summary — The product count for each status (worst to best) displays underneath the
widget title.
•
Top value — The highest value in the table.
•
Port — The port affected by this monitor. Click to launch the Port Page (refer to
on page 325). When you launch the Port page, the detailed view closes.
•
Connected_Port (where Connected_Port is Connected Port, Initiator, or Target) — Displays the
address of the port:
•
RX Link Resets /sec — The number (error rate) receive link reset errors per second for the
duration specified in the monitor.
•
RX Link Resets — The number (error count) of receive link reset errors.
•
TX Link Resets/sec — The number (error rate) of transmit link reset errors for the duration
specified in the monitor.
•
TX Link Resets — The number (error count) of transmit link reset errors.
Viewing additional details for the Top Port Link Resets monitor
1. Click the View Details icon.
A more detailed widget displays which includes the following data:
•
Scope — The scope configured for the dashboard.
•
Port — The port affected by this monitor. Click to launch the Port Page (refer to
on page 333). When you launch the Port page, the detailed view closes.
•
Connected_Port (where Connected_Port is Connected Port, Initiator, or Target) — Displays
the address of the port:
•
RX Link Resets /sec — The number (error rate) receive link reset errors per second for the
duration specified in the monitor.
•
RX Link Resets — The number (error count) of receive link reset errors.
•
TX Link Resets/sec — The number (error rate) of transmit link reset errors for the duration
specified in the monitor.
•
TX Link Resets — The number (error count) of transmit link reset errors.
•
Product — The product affected by this monitor.
•
Type — The type of port (for example, U-Port).
•
Identifier — The port identifier.
•
Port Number — The port number.
•
State — The port state (for example, Enabled).
•
Status — The port status (for example, Up).
2. Click the close (X) button.