Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 2282)

2210 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Host properties
E
3. Click OK to close.
FCSP Status Whether FC-SP authentication is being used.
Algorithm The configured authentication algorithm.
Group The DH group, which is DH-null (group 0), which is the only option.
Error Status The health status of the Fibre Channel Security Protocol parameters.
QoS
Configured QoS State Indicates whether QoS is enabled or disabled.
Operating QoS State Indicates whether QoS is on or off.
Total BB Credit The total number of buffer credits.
Priority Levels Lists the available priorities (High, Medium, Low).
QoS Percentage The value represents the bandwidth in percentage for each of the
priorities (high, medium, and low) and the three values must equal
100 percent.
IO Execution Throttle
IO Execution Throttle Max Value Indicates the maximum value of IO Execution Throttle. Maximum
value is 2000.
IO Execution Throttle Operational
Value Indicates the operational value of IO Execution Throttle. Operational
value ranges from 0 through 2000.
IO Execution Throttle Configured
Value Indicates the configured value of IO Execution Throttle. Configuration
value ranges from 0 through 2000.
VM Displays details about the VM of the following operating parameters:
•
VM Name
•
State
•
Status
•
GUID
•
Path
•
Memory Assigned
•
Hard Drives Count
•
Processor Count
•
Uptime
•
Notes
Add button Click to add a user-defined property. For more information, refer to
“Adding a property field” .
Edit button Click to edit a user-defined property. For more information, refer to
“Adding a property field” .
Delete button Click to delete a user-defined property. For more information, refer to
“Adding a property field” .
TABLE 31 Adapter port properties (Continued)
Field Description