Traffic flow measures – Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 524

452
Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Traffic flow dashboard monitors
8
Traffic flow measures
You can use the following measures to create your traffic flow monitors:
•
SCSI
-
Read Frame Count (frames) — The SCSI read command frame count as reported in the last
data point received for the flow.
-
Write Frame Count (frames) — The SCSI write command frame count as reported in the
last data point received for the flow.
-
Read Frame Rate (f/s) — The SCSI write frame rate per second as reported in the last data
point received for the flow.
-
Write Frame Rate (f/s) — The SCSI write frame rate per second as reported in the last data
point received for the flow.
-
Read Data (Bytes) — The SCSI read data in bytes as reported in the last data point received
for the flow.
-
Write Data (Bytes) — The SCSI read data in bytes as reported in the last data point received
for the flow.
-
Read Data Rate (Mbps) — The SCSI read frame in megabytes per second rate as reported
by the last data point.
-
Write Data Rate (Mbps) — The SCSI write frame rate in megabytes per second as reported
by the last data point.