Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1954)

1882 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Configuration rules
47
• Port Profile Interface Rule — The rule fails when any interface (10 Gbps port or LAG) on the
device does not have a port profile.
Table 168 defines the logical expressions for this rule.
Viewing configuration rule details
1. Select Monitor > Configuration Policy Manager.
The Configuration Policy Manager dialog box displays.
2. Click Add.
The Add Monitor dialog box displays.
3. Click the Switch/Router Checks tab.
End: Network OS Ten Gigabit
Ethernet Interfaces !
AND Start: Network OS LAG
Interfaces Processes all LAG interfaces on a Network OS device.
interface Port-channel .*
Network OS Interface NOT
shutdown Checks whether the interface is configured as shutdown.
This condition should be used within an interface block.
Not Matches - Lines in any order
shutdown
End: Network OS LAG
Interfaces !
TABLE 168 Port Profile Interface Rule expressions
AND/OR ( Block/Condition Name ) Details - Description/Condition/Configuration
Start: Network OS Ten Gigabit
Ethernet Interfaces Processes all 10 Gigabit Ethernet interface on a Network OS
device.
interface TenGigabitEthernet .*
Network OS Interface Port
Profiled Checks whether the interface port profiled. This condition
should be used with in an interface block.
Matches - Lines in any order
port-profile-port
End: Network OS Ten Gigabit
Ethernet Interfaces !
AND Start: Network OS LAG
Interfaces Processes all LAG Interfaces on a Network OS device
interface Port-channel .*
Network OS Interface Port
Profiled Checks whether the interface port profiled. This condition
should be used with in an interface block.
Matches - Lines in any order
port-profile-port
End: Network OS LAG
Interfaces !
TABLE 167 No Interface Shutdown Rule expressions (Continued)
AND/OR ( Block/Condition Name ) Details - Description/Condition/Configuration