Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 2298)

2226 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
CLI Templates
G
TABLE 31 MCT Cluster Deletion
Feature Description CLI Commands
MCT Delete cluster. no cluster $
$
no vlan $
no vlan $
TABLE 32 MCT Client Creation
Feature Description CLI Commands
MCT Create a cluster client. cluster $ $
client $
rbridge-id $
client-interface ethernet $
deploy
TABLE 33 MCT Client Deletion
Feature Description CLI Commands
MCT Delete a cluster client. cluster $ $
no client $
TABLE 34 MPLS – Loopback Interface Configuration
Feature Description CLI Commands
MPLS Loopback interface configuration
used for device reachability using
OSPF. It assigns an IP address and
advertises the interface through
OSPF. ! Required for LSP egress address in LSP Manager as well as a
soft interface for IP routing
interface loopback $
enable
ip ospf area $
ip address $
TABLE 35 MPLS – Core Interface Configuration
Feature Description CLI Commands
MPLS MPLS core interface configuration
such as assigning an IP address and
advertising using OSPF ! Core facing interfaces need IP address for MPLS
! Repeat the following commands for all MPLS core interfaces in
the product
interface ethernet $
enable
ip ospf area $
ip address $
router mpls
mpls-interface ethernet $