Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1824)

1752 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Flow Monitor
44
Flow Monitor example procedures
The following examples provide step-by-step instructions for using the Flow Monitor feature.
“Monitoring LUN level statistics” on page 1752"
“Viewing summary flow data for a specific device pair” on page 1753"
“Configuring a learned flow” on page 1754"
“Configuring an end-to-end monitor flow” on page 1755"
“Configuring a frame monitor flow” on page 1756"
“Configuring a Top Talker monitor flow” on page 1757"
“Configuring a Flow Monitor flow for a trunk group” on page 1758"
“FC router fabrics Flow Monitor flow example procedures” on page 1759"
“FC router fabric monitors using virtual port IDs” on page 1765"
Monitoring LUN level statistics
A common use of flow monitors is to monitor traffic flowing from a particular ingress port to a
specified LUN.
The following example creates a flow named “lunFlow11” that monitors traffic ingressing on port 5
between device 010502 and device 030700 using LUN 4, and then displays the results of that
flow.
Figure 795 provides an illustration of what occurs in the example.
FIGURE 795 LUN monitoring flow example
LUN Any LUN values defined in the flow definition.
Bi-Directional Whether the flow is bidirectional (yes) or not (no).
Flow Definition Persistence Whether the flow is configured to Persist over switch reboots (yes) or
not (no).
Last Updated Time The date and time the sub-flow was last updated.
TABLE 155 Flows table fields and components (Monitor flow) (Continued)
Fields and components Description