Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 505)

Brocade Network Advisor SAN + IP User Manual 433
53-1003155-01
User-defined performance monitors
8
Measures
Depending on the object (products, ports, traffic) you want to monitor, you can choose from the
following measures:
• Product
- Memory Utilization Percentage — The memory utilization percentage for the product.
- CPU Utilization Percentage — The CPU utilization percentage for the product.
- Temperature — The temperature in Celsius for the product.
- Fan Speed — The fan speed in RPM for the product.
- Response Time — The response time in seconds for the product.
- System Up Time — The system up time in days for the product.
- Ports Not In Use — The number of ports not in use for the product.
- Ping Packet Loss Percentage — The ping packet loss percentage for the product.
- AP Client Count — The number of AP clients for the product.
• Port
- Common

Port Utilization Percentage — The memory utilization percentage.

Traffic — The traffic in mbps.

CRC Errors — The number of CRC errors.
- FC

Link Resets — The number of link resets.

Signal Losses — The number of signal failures.

Sync Losses — The number of synchronization failures.

Link Failures — The number of link failures.

Sequence Errors — The number of sequence errors.

Invalid Transmissions — The number of invalid transmissions.

C3 Discards — The number of class 3 frames discarded.

C3 Discards TX TO — The number of transmitted class 3 frames discarded due to
timeout.

C3 Discards RX TO — The number of received class 3 frames discarded due to
timeout.

C3 Discards Unreachable — The number of class 3 frames discarded due to
unreachable destination.

C3 Discards Other — The number of class 3 frames discarded due to other reasons.

Encode Error Out — The number of encode errors outside of the frame.

SFP Power — The SFP power in dbm.

SFP Voltage — The SFP voltage in mV.

SFP Current — The SFP current in mA.

SFP Temperature — The SFP temperature in Celsius.

Invalid Ordered Sets — The number of invalid ordered sets received at a port.

BB Credit Zero — The number of transitions in and out of the BB credit zero state.

Truncated Frames — The number of truncated frames received at a port.