Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1972)

1900 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Running a configuration policy manager
47
Running a configuration policy manager
Before you run a configuration policy manager, make sure your configuration policy managers are
valid. Valid configuration policy managers must have at least one policy selected with one or more
targets. Management checks do not require a target.
To run an existing configuration policy manager, complete the following steps.
1. Select Monitor > Configuration Policy Manager.
The Configuration Policy Manager dialog box displays.
2. Select the policy you want to run in the Monitors list.
3. Click Run.
When the configuration policy manager check is complete, the Policy_Name - Configuration
Policy Manager Report displays (
Figure 844 ) in a web browser.
FIGURE 844 Policy_Name - Configuration Policy Manager Report
RFS AAA Policies Processes all the AAA policies
available for the RFS device. Yes aaa-policy.* !
RFS Profile Processes all the profiles available for
RFS device. Yes profile.* !
TABLE 170 Predefined blocks (Continued)
Name Description Use
regular
expression Block Start Block End