Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 262)

192 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Software Configuration
5
• CFB_AES_256 (continue with step 7 )
• NONE (go to step 8 )
7. Enter the privacy password (case sensitive, 8 to 16 characters) in the Priv Password and
Confirm Password fields.
Displays as asterisks. Allows all printable ASCII characters.
8. Click Apply or OK to save your work.
Software Configuration
The Management application allows you to configure the following software settings:
• Certificates — Support settings to allow enhanced diagnostics.
• Client export port settings — A port for communication between the client and server.
• Client/Server IP — IP configuration settings.
• IP preferences — IP settings specific to IP product managemental.
• Memory allocation settings — Memory allocation for the client and server.
• Product communication settings — Connections between the server and SAN switches or IP
products.
• FTP/SCP/SFTP server settings — Internal or external FTP or SCP server settings.
• Server port settings — Server port settings.
• Support mode settings — Support settings to allow enhanced diagnostics.
Certificates
Certificate management allows you to enable certificate validation between the Management
application server and products when HTTPS is enabled and between server and client when SSL is
enabled on server. For more information about product communication, refer to
“Product
communication settings” on page 215.
Certificate management also allows you to manage the Management application server truststore
as well as the Management application client truststore. On the Management application server,
the truststore is maintained as two separate files: truststore and keystore. A truststore contains
certificates from other third-parties with which the Management application server communicates.
The truststore file is used when making decisions on what to trust. The server truststore
(truststore.jks) is stored in the Install_Home/conf/security/ directory. A keystore file stores the
Management server’s identity and its private key. The server keystore file (keystore.jks) is stored in
the Install_Home/conf/security directory.
When SSL is enabled on the server, the server presents the keystore certificate to authenticate
itself with the client. The Management application client truststore contains certificates from the
Management application servers with which the client communicates. The Management
application client truststore does not have a private key.