Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 2270)

2198 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
IP device properties
E
Port Actions list Select to enable or disable port actions.
Performance list Select to launch the Performance dialog box.
Identifier The identifier of the port.
Name The name of the port.
MAC Address The MAC address of the port.
Port Status The status of the port.
Port State The state of the port.
Type The port type.
Speed The speed of the port.
L2/Tag Mode Whether the port is tagged or untagged.
Untagged VLAN ID The untagged VLAN identifier of the port.
Duplex Mode The duplex mode of the port.
Role The role of the port. Possible values include the following roles:
•
Fabric
•
Edge
•
Stacking
•
Peri Port
For MCT switches, the port role is either ICL or MCT.
Profile Mode Displays the profile mode status of the port; for example, Enabled or
Disabled.
Active Profiles Displays the active profiles associated with the port.
LAG/Trunk ID Displays the LAG name and the trunk port identifier.
Attached MAC Displays the MAC address of the attached device. The value is empty
when the port is not connected. The value contains a comma-separated
list of MAC address when more than one MAC address is found.
Stacking Port Whether or not the port stacked.
MCT Client Name The MCT client name.
Access Points tab Select to display information about access ports (APs) connected to the
device.
Connected AP count Number of APs connected to the controller or switch.
Managed AP count Only applicable to the selected controller. Number of APs that the
selected controller manages.
Name The device name used to identify the AP.
Device MAC The AP device MAC address.
Model The model of the AP.
Serial Number The serial number of the AP.
Firmware version The firmware level of the AP.
Status The status of the AP.
Controller \ Port The IP address of the controller or switch connected to the AP. Also
displays the port number if the AP is directly connected.
TABLE 232 IP device and port properties (Continued)
Field/Component Description