Viewing iscsi properties – Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 2258
2186
Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Viewing SAN device properties
E
4. Click OK on the Properties dialog box to close the dialog box.
Viewing iSCSI properties
The iSCSI Properties dialog box displays information related to iSCSI. To view the properties for an
iSCSI device, complete the following steps.
1. Right-click a product icon and select Properties.
The Properties dialog box displays.
2. Select the iSCSI tab.
NOTE
Some fields may not be available for all products.
Type
The level or type of RAID storage. Possible values are as follows:
0 — Striped disk array without fault tolerance.
1 — Mirroring and duplexing.
2 — Hamming code ECC.
3 — Parallel transfer with parity.
4 — Independent data disks with shared parity disk.
5 — Independent data disks with distributed parity blocks.
6 — Independent data disks with two independent distributed parity
schemes.
7 — Optimized asynchrony for high I/O rates as well as high data
transfer rates.
10 — Very high reliability combined with high performance.
53 — High I/O rates and data transfer performance.
0+1 — High data transfer performance.
Total (Count)
All LUNs, whether assigned or not, that currently exist on this storage
device.
Total (Size GB)
The total amount of storage space on the storage device, in gigabytes.
Unique LUN ID
Identifies the unique LUN identifier.
Volume State
The volume state of the LUN.
Add button
Click to add a user-defined property. For more information, refer to
Edit button
Click to edit a user-defined property. For more information, refer to
Delete button
Click to delete a user-defined property. For more information, refer to
TABLE 226
Storage Properties (Continued)
Field
Description